Smash shot: “Hard-hit
overhead shot that forces the shuttle sharply downward. Badminton's primary attacking stroke.”(Badminton
Ottawa, 2015).
The
Badminton Smash is the most aggressive and effective shot in badminton and is
typically utilised by a player to “seal the deal” against their opponent
(Badminton-information, 2012). If performed correctly, the smash shot is almost
impossible to return. This particular badminton skill can be initially
challenging and requires correct timing and technical control of the body.
There are several significant features that are to be considered whilst
performing the movement which include, balance, body form and the
height/speed/angle of release (Waddell & Gowitzke, 2000). In a visual sense, the flawless badminton smash would see
the athlete standing sideways to the net with the racket held overhead. From
here the athlete jumps, whilst swinging the racket hand forwards hitting the
shuttle in a downward motion, landing on the opposition’s court
(Badminton-information, 2012). However, a biomechanical analysis can further
enhance the badminton players and coaches understanding of the biomechanical
principles involved when performing a badminton smash shot, whilst
simultaneously constructing further knowledge that may be useful within other
skills of the sport. From a biomechanical perspective, significant
considerations include force summation, momentum, velocity, balance, centre of
gravity, levers, projectile and trajectory, height/speed/angle of release (Waddell
& Gowitzke, 2000).
Figure 1 (Proddatur Municipal Indoor Shuttle Stadium, 2015) |
The Answer
In order to understand the mechanics that enable athletes to perform the
badminton smash shot, there are numerous biomechanical principles that must be comprehended.
To do this, the information is divided
into the following subheadings:
- Preparation Phase
- Execution Phase
- Follow through
Preparation Phase
The preparation phase
consists of the player preparing for the shot he/she is about to perform.
Within this phase there are several performance-based actions that will assist
with the players ability to perform the smash shot using the optimal technique.
To maintain balance throughout the shot, it is critical to retain a good base
of support. The base of support is the area within an outline of all ground
contact points (Whiting & Rugg, 2015). Players can increase the base of
support by widening their stance, which in turn lowers their centre of gravity
and provides maximum balance and stability. In order to proficiently combine
the benefits of a wide base of support, a player’s line of gravity should pass
through their base of support (Burkett & Carr, 2010). For example, when
setting up for a smash shot, the players body must retain a sideways stance
with the rear foot back and parallel to the back line, the body will be
slightly bent and the centre of gravity will be over the base of support in
order to remain balanced for the jump.
Execution Phase
The Summation of Forces is a significant aspect in
executing an optimal badminton smash shot and can be defined as “the sum of all
forces, generated to each body part” (Sports training adviser, 2009). Newtons Second
Law of acceleration states, “The acceleration of an object is proportional to
the net force acting on it and inversely proportional to the mass of the object”
(Blazevich, 2010). For example, the velocity and acceleration of the
shuttlecock is dependent on the speed and force of the last portion of the body
at the time of contact, which in this case is the lower arm and wrist. The force must be generated using as many
parts of the body possible and in correct sequence by using the largest muscles
first followed by the smallest muscles last, but fastest (Sports training
adviser, 2009). When executing a jump smash, the force begins from the thighs,
hips and abdominals as a result of the jump. The force is then transferred to
the chest, shoulder and upper arm and lastly, the force is transferred to the
lower arm, wrist and the racquet, ultimately passing the force onto the shuttle
through the impact of the racquet (Rasmussen, 2012). The summation of forces in
a smash shot allows for the player to produce more momentum at the racquet head. Momentum is the quantity of motion
and can me determined by multiplying the mass of a body by its velocity
(momentum= mass x velocity) (Blazevich, 2010).
Movement throughout the body is produced by a
system of levers, which are formed by human bones and muscles acting together.
Levers are used to increase a small force into a larger force, creating a
strength advantage for the player when performing a sporting skill (Behnke, 2015). The badminton smash is a third class lever, as
the force is located between the axis and the resistance. For example, when
performing a badminton smash, the player is using the bones (humorous, radius,
ulna) and muscles (bicep, tricep) within their racquet arm as a lever by
extending it to its fullest, allowing for maximum force imparting onto the
shuttle for the shot. By
increasing the length of the lever, this then increases the range of motion at
the levers end, therefore increases the speed of the racket (Auckland &
Elliot, 2009). This being said, beginners often start with a shorter racquet in
order to decrease the inertia gathered by the racquets, as this can often make
the racquet feel heavier and decrease the accuracy of the shot.
There are several factors that influence the
direction in which the shuttle moves through the air, these include, speed of
release, angle of release and height of release (Blazevich, 2010). In relation
to the smash shot, the height of release is the point at which the shuttle
makes contact with the racquet and determines the horizontal distance that the
shuttle travels, however an increase of the height of release is a significant
advantage in playing the smash shot in badminton as it decreases the angle that
the racquet makes on contact with the shuttlecock. This creates a steeper angle
and makes the shot harder to return for the opponent. Tying in closely with the
height of release, the angle of release is another crucial aspect to consider
when performing a smash shot as it determines the time the shuttle stays in the
air and the horizontal distance that the shuttlecock travels. (World Badminton,
n.d). However there are particular aspects to consider that may influence the
angle of release. After the shuttle makes contact with the racquet, there is a
significant drop in the object due to the aerodynamic structure of the
shuttlecock (solid end is heavy and cone end is light), resulting in a pull of
gravity on the solid end of the object (World Badminton, n.d).
In order to gain maximum velocity when
performing a smash shot and to ensure that the shuttlecock travels at an
appropriate height to proceed over the net, Newtons First Law is applied.
Newtons First Law states that, “an object will remain at rest or continue to move with
constant velocity as long as the net force equals zero” (Blazevich, 2010). In a
badminton smash shot, this means that if the shuttlecock is in a specific
direction of motion, it wont move unless an external force is applied, in this
case the external force being the racquet. It is at this stage of shuttlecock/racquet
contact where Newtons Third Law of motion occurs ( “for every action, there is an
equal and opposite reaction”) (Blazevich, 2010). While the shuttle is
making contact with the racquet, a sufficient amount of force must be applied
to the centre of the racquet in order to maximise the opposite reaction.
Correspondingly, when performing a jump shot, the player is exerting a force
onto the ground in order to jump up. The ground will be exerting an equal and
opposite force back to the player, thus pushing them into the air to perform
the shot.
Figure 3 Ground
reaction forces that are present, Source: Blazevich, A,
(2012), “Sports biomechanics, the basics: Optimising human performance”,
A&C Black, Pg 45.
The diagram above is a representation of the ground reaction forces that are present when the foot makes contact with the ground with horizontal and vertical reaction forces evident. The ground reaction forces can be manipulated to assist in the acceleration if the force generated is large enough to overcome the inertia.
Follow Through
The follow through phase is performed initially after a player hits the
shuttlecock. A common mistake players make is to follow-through across the
body. This causes players to lose momentum and power of the shot and forces the
smash off to the left (Badminton bible, n.d). When considering Newtons Third
Law, the shuttlecock will be travelling in the direction the force is applied.
This means that if the racquet follow through is towards to target, that is the
direction that the shuttlecock will travel in.
Within the follow through phase, it is important to maintain balance and
stability. As the racquet moves in front of the body to follow through, the
rear leg must stay back to ensure balance and the centre of gravity is
maintained. Overall, the follow through is critical in influencing the final
path of the shuttlecock and the general success of the shot (Burkett & Carr,
2010).
How else can we use this information?
By considering
the biomechanical principles of a sporting skill, athletes are able to develop
the maximum and effective technique that is biomechanically possible for that
skill (Blazevich, 2010). The information provided within this blog can easily
be transferable to all areas of badminton as well as similar sports such as
tennis, lacrosse, table tennis and cricket.
By
understanding the biomechanical principles of a sport or skill, athletes have
the capability to produce successful execution of a skill whilst also
understanding what is essential in further improving their skills as
professional athletes. Furthermore, by understanding the underlying principles
of biomechanics, it can enable
coaches/teachers to give students
constructive and correct advice regarding technique, body position and physics.
References
Badmintonbible,. Improving your technique for
clears and smashes | Badminton Bible. Retrieved 12 June 2015, from
https://www.badmintonbible.com/articles/forehand-power/improving-technique
Badminton-information, (2012). Badminton
Smash. Retrieved 8 June 2015, from
http://www.badminton-information.com/badminton_smash.html
Badminton Ottawa,. (2015). Badminton
rules. Retrieved 10 June 2015, from
http://www.badmintonottawa.com/basicRules.htm
Behnke, R. (2015). Kinetic Anatomy 3E: Levers work
to create movement in the human body. human-kinetics. Retrieved 5
June 2015, from
http://www.humankinetics.com/excerpts/excerpts/levers-work-to-create-movement-in-the-human-body
Blazevich, A. (2010). Sports biomechanics : The basics : Optimising human performance (2nd
ed.). London: A. & C. Black.
Burkett, B., & Carr, G.
(2010). Sport mechanics for coaches. Champaign, IL: Human Kinetics.
Proddatur Municipal Indoor Shuttle
Stadium,. (2015). Proddatur Municipal Indoor Shuttle Stadium |.
Retrieved 8 June 2015, from http://www.pdtrmplindoorstadium.com
Rasmussen, P. (2012). How to Execute a Powerful
Badminton Jump Smash!. Badminton Connect. Retrieved 1 June 2015,
from http://www.badmintonconnect.com/video/14/the-perfect-badminton-jump-smash
Sports training adviser,. (2009) Principles
of Force in Sports. Retrieved 7 June 2015, from http://www.sports-training-adviser.com/principlesofforce.html
Waddell, D., & Gowitzke, B.
(2000). BIOMECHANICAL PRINCIPLES APPLIED TO BADMINTON POWER STROKES. ISBS
- Conference Proceedings Archive, 1(1). Retrieved from https://ojs.ub.uni-konstanz.de/cpa/article/view/2233
Whiting, W., & Rugg, S.
(2015). Five factors determine stability and mobility. Human-Kinetics.
Retrieved 2 June 2015, from http://www.humankinetics.com/excerpts/excerpts/five-factors-determine-stability-and-mobility
Worldbadminton,. World Badminton. Retrieved 7 June 2015, from http://www.worldbadminton.com/ |
sieg
ReplyDeleteThe casino in Ohio looks like a gaming town with some good
ReplyDeleteAt the casino in Ohio, you're probably 광주광역 출장안마 familiar 전라북도 출장안마 with 공주 출장샵 the Buckeye state's closest 울산광역 출장안마 casinos, but there's also a casino that caters 동해 출장안마 to people interested in